and generous bulk discounts
Within Great Britian
On all products, for peace of mind
You could have this delivered by Wed 05 Feb
Discounts only apply to multiples of the same product, and exclude accessories.
Centres to Prevent Vehicle Access - 1.2 to 1.3m
Wall Thickness - 3mm
Lifting Weight - 4Kgs (Height 500mm)
&
Lifting Weight - 6Kgs (Height 745mm)
Product ID: 4183
This Square post is a simple, cost efficient telescopic parking post which is lockable by padlock. It is a highly effective way to prevent unwanted vehicle access and deter ram raids.
The padlock is positioned at the base of the post, between the post and cover flap for added protection. The post is operated by lifting fully out of the ground and then rotating 45deg. The lug at the rear of the post aligns with the flap to allow the padlock to lock the post to the flap.
INSTALLATION
Excavate hole 1100mm deep and 300mm diameter. Install with chippings in bottom to allow drainage. Lid of post should be no more than10mm above ground level. Concrete should be used to cover the top 360mm of the hole around the post. Keep sliding post clean. Recommended centres for posts to prevent vehicle access is 1.2 - 1.3m
This product comes with a 1 year warranty as standard
"Had one before which worked well"